Home > Products > Pipette & Disposables > Surepette® Non-Autoclavable Adjustable Pipettes

SurePette® Non-autoclavable Adjustable Pipette

Share
SurePette® Series Pipettes aspirate and dispense volumes of liquid precisely and safely. A volume indicator makes it easy to set volume and to eliminate calculation errors. A tip ejector button simplifies the discarding of the tip and makes the operation safe. Each SurePette® is factory calibrated and carefully checked gravimetrically.
Product Description

CATALOG

CATALOG NO.PRODUCT NAMECERTIFICATE
ABT-SPA-10SurePette Adjustable Pipette 0.5 - 10 μlCE
ABT-SPA-20SurePette Adjustable Pipette 2 - 20 μlCE
ABT-SPA-50SurePette Adjustable Pipette 5 - 50 μlCE
ABT-SPA-100SurePette Adjustable Pipette 10 - 100 μlCE
ABT-SPA-200SurePette Adjustable Pipette 20 - 200 μlCE
ABT-SPA-1000SurePette Adjustable Pipette 100-1000 μlCE
ABT-SPA-5000SurePette Adjustable Pipette 1000-5000 μlCE


INTRODUCTION

1. SUREPETTE® Series Pipettes include Adjustable Volume Pipettes and Fixed Volume Pipettes, covering a volume range from 0.5 μL to 5 mL;

2. SUREPETTE® Series Pipettes aspirate and dispense volumes of liquid precisely and safely;

3. A volume indicator makes it easy to set volume and to eliminate calculation errors;

4. A tip ejector button simplifies the discarding of the tip and makes the operation safe;

5. Each SUREPETTE® is factory calibrated and carefully checked gravimetrically using distilled water and an analytical balance.

 

PIPETTING

1. Attach a new disposable tip to the tip holder. Press only enough to make a positive airtight seal. This avoids leaks or poor accuracy;

2. Pre-rinse the tip by aspirating the first volume of liquid and then dispensing it back or to waste;

3. Press the push button to the first stop. This part of the stroke is the volume displayed on the volume indicator;

4. Holding SUREPETTE® vertically, immerse the tip into the liquid to a depth of 2 – 4 mm;

5. Wait 2 – 3 seconds. Allow the push button to return slowly and smoothly to the top position. DO NOT let it snap up;

6. Withdraw the tip from the liquid after the full volume of sample is drawn into the tip, touching against the edge of the container to remove excess;

7. To dispense sample, place the tip end against the inside wall of the recipient vessel at an angle of 10°to 40°. Depress the push button slowly and smoothly to the first stop. Wait 1 – 3 seconds. Then press the push button to the second stop (bottom of stroke), expelling the residual liquid from the tip;

8. Withdraw SUREPETTE® from the vessel carefully. Allow the push button to return to the top position;

9. Discard the tip by depressing the tip ejector.


SPECIFICATIONS

Model & Volume RangeNormal VolumeAccuracyPrecision
(mean error)(repeatability)
μl%%

SPA - 10

0.5~10 μl

1 *±12≤4.0
5±6.4≤3.0
10±3.2≤2.0

SPA -20        

2~20 μl

2±10≤3.0
10±3.2≤2.0
20±3.0≤1.5

SPA - 50      

5~50 μl

5±6.4≤3.0
25±3.0≤2.0
50±2.4≤1.5

SPA - 100

10~100 μl

10±3.2≤3.0
50±2.4≤1.5
100±1.5≤1.0

SPA - 200   

20~200 μl

20±3.0≤1.5
100±1.5≤1.0
200±1.5≤1.0

SPA - 1000

100~1000 μl

100±1.5≤1.0
500±1.5≤0.5
1000±1.2≤0.5

SPA - 5000

1000~5000 μl

1000±1.5≤0.5
2500±1.0≤0.5
5000±1.0≤0.5


Note: The above information is for reference use only. Please refer to the product insert provided with the products before use.